|
|
 |
| |
| Services |
| |
| |
At Sensatec we are committed to providing the Best Fire Safety Service Provision available. Our own Quality Assured Service has many features that have been introduced to make this possible all of our equipment and products are manufactured in the United Kingdom and have LPCB Approval. Our Engineers are fully trained in line with Company Policy, to ensure that technical and Conduct Standards are maintained at a high level. Our technicians have gained a wide range of experience working on many national and international projects.
They have been directly responsible for all of the stages of the service provision process; from the initial design through installation, commission, handover and aftercare maintenance schedules.
|
|
| |
|
|
|
|
| |
 |
Fire Detection Systems |
|
| |
|
|
| |
Most commercial premises in London have a Fire Alarm System. We are experts in the Maintenance of Fire Alarm Systems in a wide range of environments. We can support addressable and conventional systems, and are experienced in delivering a professional 24 hour support service on large multi networked sites either direct to the client or on behalf of third party Building maintenance companies. |
|
|
| |
|
|
|
| |
| |
|
| |
|
| |
|
Gas Suppression Systems |
|
| |
|
|
| |
CO2, Argon, Argonite, Inergen FM200, Water Mist...we can design, supply, install, maintain and acquire third party certification for all of these major extinguish ants in use today and can also offer a full range of Fire Suppression equipment and Services.
We specialise in the maintenance of Systems within High Risk Environments, where Quality Assured procedures are a necessity. All of our contract agreements are fully supported with Method and Quality Assured Procedure documentation |
|
| |
|
|
| |
 |
Live Broadcasting Facilities |
|
Power Stations |
|
Live Central Network Computer Rooms |
|
Data Storage Facilities |
|
|
| |
|
|
| |
|
|
|
|
|
| |
|
HSSD (Vesda etc) |
|
| |
|
|
| |
It is quite often found that rooms that are protected by a fire suppression system are also protected by an independent HSSD (High Sensitivity Smoke Detection System). Our project and field engineer team are fully trained in the design and installation of Vesda. Our engineers have many years experience in a wide range of environments. Our engineers carry consumable spares for vesda products, such as batteries and filters. |
|
| |
|
|
| |
|
|
|
|
|
| |
|
Room Pressure Integrity Testing |
|
| |
|
|
| |
A fire protection system needs to operate to the best of its ability and to maximum efficiency. To do this, adequate containment of the extinguishant within the risk area is necessary and it is therefore a requirement that integrity testing is carried out on a regular basis (at least annually). The 'integrity' of an enclosure is its capability to retain an extinguishing agent.
The test does not involve the discharging of extinguishant, and can be repeated at very short notice and therefore allowing more than one test (if required) on a single visit.
A written report is issued on completion of each test and a certificate issued if a positive result is achieved. This certificate is valid for one year unless changes have been made to the room during the year (e.g. equipment upgrade and enclosure modification) - if any of these have occurred then a retest should be undertaken after all works have been completed. If tests indicate failure to meet the required retention time, then a survey is carried out noting leakage areas. A report is then submitted indicating remedial sealing works required to improve results.
|
|
| |
|
|
| |
|
|
|
|
|
| |
|
Fire Extinguishers |
|
| |
|
|
| |
 |
Our highly trained Engineers will carry out the inspection and service of fire extinguishers as required by the relevant British Standard: BS 5306 Part 3, and provide a site asset register along with a Certificate of Inspection. That will identify any risks that have been noted and any recommendations to achieve compliance with BS 5306 Part 8.
A full range of competitively priced equipment and parts can be provided. |
|
|
|
|
|
| |
|
Emergency Lights |
|
| |
|
|
| |
|
|
|
|
|
| |
|
Dry Riser testing |
|
| |
|
|
| |
We have experienced Engineers available to carry out the annual pressure testing of the following installations (to BS 5306 Part 1.)
Dry rising, dry falling and wet rising mains |
|
|
|
|
| |
|
Staff awareness training |
|
| |
|
|
| |
|
Fire Risk Assessment |
|
| |
|
Sprinklers / Pre Action |
|
| |
|
|
|
|
|
|
|
| |
|
Disabled Refuge Systems |
|
| |
|
|
| |
These systems have been available for sometime, yet have more recently been requested to play a more vital role in the management of a potential emergency incident. They are also frequently installed to assist with the DDA (Disabilities Discrimination Act) and refuge requirements, and for this reason it is vital that they are designed, installed and commissioned to the BS5839 Pt9 standard; something we are well placed to provide and advise upon. |
|
|
|
|
| |
|
Sprinklers / Pre Action |
|
| |
|
|
| |
|
|
|
|
|
| |
|
Quality |
|
| |
|
|
| |
 |
Within Sensatec Ltd we are committed to provide products and services, which meet the customers’ specified contractual requirements. Sensatec recognised that in order to provide and maintain a consistently high quality in the work it undertakes, an effective Quality Management System is necessary so as to ensure that proper communication, work control and accountable records are generated for all work undertaken. We are totally committed to setting and achieving quality standards that are capable of meeting (in all respects) the specified requirements and reasonable expectation of our customers.
|
It is the policy, therefore, of Sensatec to control and conduct its business of providing Fire Detection and Protection Specialist Support Services. This quality management shall be in accordance with the quality system requirements specified in ISO 9001:2000.
This quality manual defines Sensatec’s quality management system which has been established and adopted as the means for achieving these declared objectives and which is detailed in the sections below.
All members of Sensatec staff are charged with promoting these aims and are required to familiarise themselves with the contents of this quality manual and to observe and implement the systems and procedures defined ion the performance of their work. Everyone connected with Sensatec Ltd shall be supported according to their individual needs for personal development.
The quality manager based at the Sensatec main office is my appointed management representative responsible for monitoring and ensuring the correct and effective implementation of Sensatec Quality management system as a whole.
Ian Barwick
Managing Director
Sensatec LTD
|
|
| |
|
|
|
|
|
| |
|
Care |
|
| |
|
|
| |
At Sensatec, we believe that it is important to develop good working relationship with our customers at every level, ensuring that they receive a quality product and service. Nothing is considered too small. We take an active role with many of our clients in implementing Structured Fire Maintenance programmes.
We can offer a wide range of technical and fire safety resources |
|
|
|
|
